"True Planetary Gearheads provide greater performance in a smaller packages..."
INMOCO's complete range of True Planetary Gearheads provide high torque through the use of True Planetary Gearing - three planet gears revolving around a single pinion, or sun gear, allowing the load to be evenly shared over the three planet gears.
When compared with old style conventional parallel shaft spur gearheads, where only two gears mesh simultaneously, the true planetary design offers three times the torque capacity, improvements in gear performance and significant space and weight savings.
True Planetary Gearheads provide greater performance in a smaller packages. High speed input allows the stepper and servo motors to operate at higher, more efficient speeds, while increasing torque.
The high speed/ low torque power of the motor is efficiently converted in to a low speed/ high torque power suitable for your application.
To get the best performance and the highest efficiency from the motor a higher motor speed should be maintained.
By using the Thomson Micron range of True Planetary Gearheads an increase in motor efficiency is realised immediately. Mounted directly to any frame size stepper or servo motor with Micron’s unique and innovative Redimount self aligning mounting system.
This system integrates the pinion drive gear directly into the gearhead assembly for error free installation. Since the pinion gear is pre-mounted, there is no axial measurement is required to obtain proper gear engagement. Thus reducing noise and increasing system performance.
