CD34M - Microcon Stepper Drive
High performance stepper module with RS232/422 indexer and bipolar microstepping drive.
The CD34M is suitable for stepper motors with the holding torque from 1.5 Nm to 8.5 Nm.
Driver Specifications
- Supply voltage - 12 to 48 V
- Motor current amplitude / phase - 3.5 A peak
- Torque speed characteristics of the CD34M module with stepper motors are identical to the CD30M board characteristics
Indexer Specifications
- User Inputs - All user inputs are opto-isolated for a high noise immunity.
- Both anodes and cathodes of optocouplers input diodes are connected to CANNON 15 Pin/F connector.
- The standard input level is 24 V (7 mA), 5 V optional.
User Outputs
- Open collecton outputs (up to 30 V); auxiliary 24 V (100 mA)
- output, GND and motor moving flag are connected to CANNON 9 Pin/F connector.
- Low level output current - 100 mA
- 24 V source drivers (switchable to 5 V output level) are optional - please add A1 appendix to the module name.
- High level output current - 40 mA
Input and Output Connectors
- RS232 (RS422) serial port input - CANNON 9 Pin/M
- RS232 (RS422) serial port output - CANNON 9 Pin/M
- User inputs - CANNON 15 Pin/F
- User outputs - CANNON 9 Pin/F
- Stepper motor - removable screw terminal - 4 way
- Power supply - removable screw terminal - 2 way
Dimensions
- 170x130x50 mm; the module contains rails for standard eurocard mounting.
